# main.py -- put your code here!
from pyb import LED #add LED
import machine
from machine import Pin
from machine import I2C
from machine import SPI
import ssd1306
import math
import time
# construct an I2C bus
#i2c = I2C(scl=Pin(14), sda=Pin(2), freq=100000)
#display = ssd1306.SSD1306_I2C(128,64, i2c)
# construct an SPI bus on the given pins
# polarity is the idle state of SCK
# phase=0 means sample on the first edge of SCK, phase=1 means the second
# CN2 OLED
#Pin(14)--SCK machine.Pin("Y6 ") --B13 --D0
#Pin(13)--MOSI machine.Pin("Y8 ") --B15 --D1
#Pin(12)--MISO machine.Pin("Y7 ") --B14 --
#Pin(16)--CS machine.Pin("Y11") --B0 --CS
#Pin(4)--RES machine.Pin("Y9") --B10 --RES
#Pin(5)--DC machine.Pin("Y10") --B11 --DC
spi = SPI(baudrate=10000000, polarity=1, phase=0, sck=machine.Pin("Y6"), mosi=machine.Pin("Y8"), miso=machine.Pin("Y7"))
display = ssd1306.SSD1306_SPI(128, 64, spi, machine.Pin("Y10"),machine.Pin("Y9"), machine.Pin("Y11"))
led_blue = LED(4)
led_blue.on()
try:
display.poweron()
display.init_display()
display.text('ESP-mp SPI OLED',1,1)
display.text('Hi, MicroPython!',1,16)
display.text('By: hbzjt2012',1,31)
# Write display buffer
display.show()
time.sleep(3)
display.fill(0)
for x in range(0, 128):
display.pixel(x, 32+int(math.sin(x/64*math.pi)*7 + 8), 1)
display.show()
time.sleep(3)
display.fill(0)
x = 0
y = 0
direction_x = True
direction_y = True
while True:
# Clear the previous lines
prev_x = x
prev_y = y
# Move bars
x += (1 if direction_x else -1)
y += (1 if direction_y else -1)
# Bounce back, if required
if x == 128:
direction_x = False
x = 126
elif x == -1:
direction_x = True
x = 1
if y == 64:
direction_y = False
y = 63
elif y == -1:
direction_y = True
y = 1
# Draw new lines
for i in range(64):
display.pixel(prev_x, i, False)
display.pixel(x, i, True)
for i in range(128):
display.pixel(i, prev_y, False)
display.pixel(i, y, True)
# Make sure the corners are active
display.pixel(0, 0, True)
display.pixel(127, 0, True)
display.pixel(0, 63, True)
display.pixel(127, 63, True)
# Write display buffer
display.show()
except Exception as ex:
led_blue.off()
print('Unexpected error: {0}'.format(ex))
display.poweroff()
转播
