|
本文实例讲述了java实现OpenGL ES纹理映射的方法。分享给大家供大家参考。具体如下：
1. GlRenderer.java文件：
package net.obviam.opengl;
import javax.microedition.khronos.egl.EGLConfig;
import javax.microedition.khronos.opengles.GL10;
import android.content.Context;
import android.opengl.GLU;
import android.opengl.GLSurfaceView.Renderer;
public class GlRenderer implements Renderer {
private Square square; // the square
private Context context;
/** Constructor to set the handed over context */
public GlRenderer(Context context) {
this.context = context;
// initialise the square
this.square = new Square();
}
@Override
public void onDrawFrame(GL10 gl) {
// clear Screen and Depth Buffer
gl.glClear(GL10.GL_COLOR_BUFFER_BIT | GL10.GL_DEPTH_BUFFER_BIT);
// Reset the Modelview Matrix
gl.glLoadIdentity();
// Drawing
gl.glTranslatef(0.0f, 0.0f, -5.0f);
// move 5 units INTO the screen
// is the same as moving the camera 5 units away
// gl.glScalef(0.5f, 0.5f, 0.5f);
// scale the square to 50%
// otherwise it will be too large
square.draw(gl); // Draw the triangle
}
@Override
public void onSurfaceChanged(GL10 gl, int width, int height) {
if(height == 0) { //Prevent A Divide By Zero By
height = 1; //Making Height Equal One
}
gl.glViewport(0, 0, width, height); //Reset The Current Viewport
gl.glMatrixMode(GL10.GL_PROJECTION); //Select The Projection Matrix
gl.glLoadIdentity(); //Reset The Projection Matrix
//Calculate The Aspect Ratio Of The Window
GLU.gluPerspective(gl, 45.0f, (float)width / (float)height, 0.1f, 100.0f);
gl.glMatrixMode(GL10.GL_MODELVIEW);
//Select The Modelview Matrix
gl.glLoadIdentity(); //Reset The Modelview Matrix
}
@Override
public void onSurfaceCreated(GL10 gl, EGLConfig config) {
// Load the texture for the square
square.loadGLTexture(gl, this.context);
gl.glEnable(GL10.GL_TEXTURE_2D); //Enable Texture Mapping ( NEW )
gl.glShadeModel(GL10.GL_SMOOTH); //Enable Smooth Shading
gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f); //Black Background
gl.glClearDepthf(1.0f); //Depth Buffer Setup
gl.glEnable(GL10.GL_DEPTH_TEST); //Enables Depth Testing
gl.glDepthFunc(GL10.GL_LEQUAL); //The Type Of Depth Testing To Do
//Really Nice Perspective Calculations
gl.glHint(GL10.GL_PERSPECTIVE_CORRECTION_HINT, GL10.GL_NICEST);
}
}
2. Square.java文件：
package net.obviam.opengl;
import java.nio.ByteBuffer;
import java.nio.ByteOrder;
import java.nio.FloatBuffer;
import javax.microedition.khronos.opengles.GL10;
import android.content.Context;
import android.graphics.Bitmap;
import android.graphics.BitmapFactory;
import android.opengl.GLUtils;
public class Square {
private FloatBuffer vertexBuffer; // buffer holding the vertices
private float vertices[] = {
-1.0f, -1.0f, 0.0f, // V1 - bottom left
-1.0f, 1.0f, 0.0f, // V2 - top left
1.0f, -1.0f, 0.0f, // V3 - bottom right
1.0f, 1.0f, 0.0f // V4 - top right
};
private FloatBuffer textureBuffer; // buffer holding the texture coordinates
private float texture[] = {
// Mapping coordinates for the vertices
0.0f, 1.0f, // top left (V2)
0.0f, 0.0f, // bottom left (V1)
1.0f, 1.0f, // top right (V4)
1.0f, 0.0f // bottom right (V3)
};
/** The texture pointer */
private int[] textures = new int[1];
public Square() {
// a float has 4 bytes so we allocate for each coordinate 4 bytes
ByteBuffer byteBuffer = ByteBuffer.allocateDirect(vertices.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
// allocates the memory from the byte buffer
vertexBuffer = byteBuffer.asFloatBuffer();
// fill the vertexBuffer with the vertices
vertexBuffer.put(vertices);
// set the cursor position to the beginning of the buffer
vertexBuffer.position(0);
byteBuffer = ByteBuffer.allocateDirect(texture.length * 4);
byteBuffer.order(ByteOrder.nativeOrder());
textureBuffer = byteBuffer.asFloatBuffer();
textureBuffer.put(texture);
textureBuffer.position(0);
}
/**
* Load the texture for the square
* @param gl
* @param context
*/
public void loadGLTexture(GL10 gl, Context context) {
// loading texture
Bitmap bitmap = BitmapFactory.decodeResource(context.getResources(), R.drawable.android);
// generate one texture pointer
gl.glGenTextures(1, textures, 0);
// ...and bind it to our array
gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]);
// create nearest filtered texture
gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MIN_FILTER, GL10.GL_NEAREST);
gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_MAG_FILTER, GL10.GL_LINEAR);
//Different possible texture parameters, e.g. GL10.GL_CLAMP_TO_EDGE
// gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_S, GL10.GL_REPEAT);
// gl.glTexParameterf(GL10.GL_TEXTURE_2D, GL10.GL_TEXTURE_WRAP_T, GL10.GL_REPEAT);
// Use Android GLUtils to specify a two-dimensional texture image from our bitmap
GLUtils.texImage2D(GL10.GL_TEXTURE_2D, 0, bitmap, 0);
// Clean up
bitmap.recycle();
}
/** The draw method for the square with the GL context */
public void draw(GL10 gl) {
// bind the previously generated texture
gl.glBindTexture(GL10.GL_TEXTURE_2D, textures[0]);
// Point to our buffers
gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
gl.glEnableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
// Set the face rotation
gl.glFrontFace(GL10.GL_CW);
// Point to our vertex buffer
gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertexBuffer);
gl.glTexCoordPointer(2, GL10.GL_FLOAT, 0, textureBuffer);
// Draw the vertices as triangle strip
gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, vertices.length / 3);
//Disable the client state before leaving
gl.glDisableClientState(GL10.GL_VERTEX_ARRAY);
gl.glDisableClientState(GL10.GL_TEXTURE_COORD_ARRAY);
}
}
3. Triangle.java文件：
package net.obviam.opengl;
import java.nio.ByteBuffer;
import java.nio.ByteOrder;
import java.nio.FloatBuffer;
import javax.microedition.khronos.opengles.GL10;
public class Triangle {
private FloatBuffer vertexBuffer; // buffer holding the vertices
private float vertices[] = {
-0.5f, -0.5f, 0.0f, // V1 - first vertex (x,y,z)
0.5f, -0.5f, 0.0f, // V2 - second vertex
0.0f, 0.5f, 0.0f // V3 - third vertex
// 1.0f, 0.5f, 0.0f // V3 - third vertex
};
public Triangle() {
// a float has 4 bytes so we allocate for each coordinate 4 bytes
ByteBuffer vertexByteBuffer = ByteBuffer.allocateDirect(vertices.length * 4);
vertexByteBuffer.order(ByteOrder.nativeOrder());
// allocates the memory from the byte buffer
vertexBuffer = vertexByteBuffer.asFloatBuffer();
// fill the vertexBuffer with the vertices
vertexBuffer.put(vertices);
// set the cursor position to the beginning of the buffer
vertexBuffer.position(0);
}
/** The draw method for the triangle with the GL context */
public void draw(GL10 gl) {
gl.glEnableClientState(GL10.GL_VERTEX_ARRAY);
// set the colour for the background
// gl.glClearColor(0.0f, 0.0f, 0.0f, 0.5f);
// to show the color (paint the screen) we need to clear the color buffer
// gl.glClear(GL10.GL_COLOR_BUFFER_BIT);
// set the colour for the triangle
gl.glColor4f(0.0f, 1.0f, 0.0f, 0.5f);
// Point to our vertex buffer
gl.glVertexPointer(3, GL10.GL_FLOAT, 0, vertexBuffer);
// Draw the vertices as triangle strip
gl.glDrawArrays(GL10.GL_TRIANGLE_STRIP, 0, vertices.length / 3);
//Disable the client state before leaving
gl.glDisableClientState(GL10.GL_VERTEX_ARRAY);
}
}
4. Run.java文件：
package net.obviam.opengl;
import android.app.Activity;
import android.opengl.GLSurfaceView;
import android.os.Bundle;
import android.view.Window;
import android.view.WindowManager;
public class Run extends Activity {
/** The OpenGL view */
private GLSurfaceView glSurfaceView;
/** Called when the activity is first created. */
@Override
public void onCreate(Bundle savedInstanceState) {
super.onCreate(savedInstanceState);
// requesting to turn the title OFF
requestWindowFeature(Window.FEATURE_NO_TITLE);
// making it full screen
getWindow().setFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN,
WindowManager.LayoutParams.FLAG_FULLSCREEN);
// Initiate the Open GL view and
// create an instance with this activity
glSurfaceView = new GLSurfaceView(this);
// set our renderer to be the main renderer with
// the current activity context
glSurfaceView.setRenderer(new GlRenderer(this));
setContentView(glSurfaceView);
}
/**
* Remember to resume the glSurface
*/
@Override
protected void onResume() {
super.onResume();
glSurfaceView.onResume();
}
/**
* Also pause the glSurface
*/
@Override
protected void onPause() {
super.onPause();
glSurfaceView.onPause();
}
}
希望本文所述对大家的java程序设计有所帮助。 |
转播
